Page 1 of 1
Cannot connect to TCM, 350Z
Posted: 17 May 2017, 08:19
by ninevoltz
I have a 2003 USDM 350Z. I am using the blue USB cable I ordered from ConceptZ Performance that is supposed to be compatible with NDSII. I am able to connect to the ECU, the BCM, and ABS, but not the TCM. Any idea why that might be? I was able to program my new spare key into the BCM using the pin code generated by Nissan SuperCode. I had a hard time finding where to download SuperCode, would it be ok to upload it to this forum for other people to use?
Re: Cannot connect to TCM, 350Z
Posted: 23 Jun 2017, 13:03
by Tom
Is you car automatic or manual? It only works with automatic cars.
You can upload the SuperCode to one of the file sharing websites and post a link on this forum.
Re: Cannot connect to TCM, 350Z
Posted: 23 Jun 2017, 22:34
by ninevoltz
Yes, my car is an automatic.
As for SuperCode, I'll just share the link to where I found it.
https://www.4shared.com/rar/xAjK2QDDce/ ... Tools.html
Re: Cannot connect to TCM, 350Z
Posted: 03 Jul 2017, 16:02
by Tom
Try the "Find ECU" function under Settings->Communication. See what ECU Ids you get.
If you are not getting ECU Id 18 try changing the "Ini Timer Offset" and scan again. Try positive and negative numbers.