Units of measurement in NDS2 - Patrol ECU and TCU
Posted: 01 Mar 2017, 16:42
Where can I find what each output is in relation to for the given units.
Example : L/P solenoid ranges from 0 - 1. Is this in Duty cycle with (0% - 100%)
Also for ECU injectors is the units in pulse width.
Having 3.4 at idle on my TB48 would seem fairly close if it was injection duration.
Example : L/P solenoid ranges from 0 - 1. Is this in Duty cycle with (0% - 100%)
Also for ECU injectors is the units in pulse width.
Having 3.4 at idle on my TB48 would seem fairly close if it was injection duration.