Page 1 of 1
08 Fx35 Problems Help needed
Posted: 12 Jun 2013, 09:20
by Speedworkz
I have a blaztII connector that won't work on my 08 Fx35, but it does work on my 03 350z. When I looked in the Supported Vehicles list it showed that it should work. Help..
Re: 08 Fx35 Problems Help needed
Posted: 12 Jun 2013, 13:23
by Tom
What engine is in your car? Is it the VQ35HR?
Try the "Find ECU" function in Communication window and see if you can pickup any ECU IDs.
Re: 08 Fx35 Problems Help needed
Posted: 21 Jun 2013, 23:02
by Speedworkz
Its a rev-up motor.
Re: 08 Fx35 Problems Help needed
Posted: 22 Jun 2013, 18:51
by Tom
OK. That's why. The Rev-up engines already use the CAN protocol for diagnostics. It's the same case with the 350Z.
Re: 08 Fx35 Problems Help needed
Posted: 30 Apr 2014, 05:55
by Speedworkz
So shouldn't it work because my 350z uses can bus as well? & When I look @ the compatibility list it's suppose to be able to work by the way its not a Rev-up its a DE
Re: 08 Fx35 Problems Help needed
Posted: 02 May 2014, 12:29
by Tom
Your 350z uses CAN for communicating between ECUs but the OBDII k-line is used for diagnostics.
The FX35 is probably using CAN for diagnostics and communication between ECUs. G37 from the same year does that as well.