NEW NDSI function

[onephatser]

Any possibility you might be able to implement a program so that I can see what my oxygen sensor that's in the catalytic converter is reading as far as voltage?

[Tom]

What gauge options do you get when you go to Settings->Data Display ECM?

[onephatser]

It gives me O2 sensor bank 1 sensor 1 and WBO2 sensor. I need O2 sensor bank 1 sensor 2. This function is not supported with NDS1.

[onephatser]

The catalytic converter sensor is not supported with NDS1. Is there a possibility that this could be implemented? The whole reason I bought the software was to be able to read that sensor.

[seb.racing]

yes, the O2 sensor is supported by NDS1
you must go to Data Display Setup
selected O2 sensor

[onephatser]

It does not work for the sensor in the catalytic converter.

[seb.racing]

This is what car?

[onephatser]

1998 Nissan 200sx with the SR20DE engine.

[seb.racing]

you have an O2 sensor before and after the catalyst

try the Live Register Test
normally the NDS1 has fontion for both O2 sensor

http://home.exetel.com.au/nds/NDSI/pict ... ogging.jpg

[onephatser]

It does in fact support the rear oxygen sensor. The parameter for it is oxygen sensor B1.