Steering Center Reset

Discussions related to Nissan DataScan II (NDSII) Windows PC software.
Post Reply
dan826
Posts: 2
Joined: 18 Aug 2012, 01:44

Steering Center Reset

Post by dan826 »

Will this unit recallibrate the steering center sensor?
Tom
Site Admin
Posts: 656
Joined: 09 Dec 2011, 19:17

Re: Steering Center Reset

Post by Tom »

Not with the current software version. We are looking into implementing this function with the next software version as a few people asked for it.
dan826
Posts: 2
Joined: 18 Aug 2012, 01:44

Re: Steering Center Reset

Post by dan826 »

That would be great. Dealer wants $110 to do this simple 5 minute procedure. I would definitely buy one of these if it supported the steering reset.
MrTorino351
Posts: 10
Joined: 30 Jul 2012, 21:55

Re: Steering Center Reset

Post by MrTorino351 »

hi,what does that actually do?
sonicii
Posts: 13
Joined: 19 Dec 2011, 18:52

Re: Steering Center Reset

Post by sonicii »

This adjustment 'teaches' the VDC system what steering wheel position is 'straight'. The VDC system uses a steering wheel angle sensor, and needs to know what the 'straight' position is so it knows when you are actually trying to turn, and by how much.

Nissan recommend it is done after each wheel alignment.
socaldt
Posts: 1
Joined: 09 Jun 2014, 16:19

Re: Steering Center Reset

Post by socaldt »

Hate to revive an old topic but has this been implemented? I am having the same issue and would like to debug the VDC using DataScan II.
Tom
Site Admin
Posts: 656
Joined: 09 Dec 2011, 19:17

Re: Steering Center Reset

Post by Tom »

Yes. This function is now available under ABS -> Works Support
Post Reply