Idle Air Relearn problems

Discussions related to Nissan DataScan II (NDSII) Windows PC software.
Post Reply
gkeylow
Posts: 2
Joined: 19 Feb 2022, 18:55

Idle Air Relearn problems

Post by gkeylow »

Im running Datascan II obviously (v 2.54) I have a ‘06 G35. But for some reason, when I run said relearn; It never completes. It always runs to the default stop time of 5000.

And this is after ECU reset, Accel Pedal & Throttle Valve.


Note: I had to change valve cover gaskets, wanted to make sure everything was kosher since I had to fully removed the intake, plenum, etc. It’s running fine, prob don’t need to have it relearn; but this is the only thing that doesn’t/isnt working with the software.

Thanks in advance for your help
gkeylow
Posts: 2
Joined: 19 Feb 2022, 18:55

Re: Idle Air Relearn problems

Post by gkeylow »

https://nisscan.com/phpBB3/viewtopic.php?f=5&t=325&sid=ffdc4ddf37eebc1cfaeeccc9f220b50a

Just found this post, I’ll run through it and get back to house guys
Jojo99
Posts: 27
Joined: 01 Mar 2022, 12:54

Re: Idle Air Relearn problems

Post by Jojo99 »

Did you ever get the software to successfully do the Idle Learn function? If not, how did you fix the problem, if it is fixed?
Post Reply