Cannot connect Using vag kkk 409 (350z hr)

Discussions related to Nissan DataScan II (NDSII) Windows PC software.
Post Reply
HOODEY
Posts: 6
Joined: 15 May 2021, 05:30

Cannot connect Using vag kkk 409 (350z hr)

Post by HOODEY »

I am unable to connect to the ECU. Any ideas?

Device drivers shows correct port. Not using a the FTDI chipset.
Tom
Site Admin
Posts: 647
Joined: 09 Dec 2011, 19:17

Re: Cannot connect Using vag kkk 409 (350z hr)

Post by Tom »

The 350Z HR engine ECU uses CAN bus for diagnostics so you need to use a Vag K+CAN adaptor and NDSIII.
Post Reply