NOTE 2008 1.6 PETROL DATASCAN VERSION

Discussions related to Nissan DataScan II (NDSII) Windows PC software.
Post Reply
michael94100
Posts: 5
Joined: 22 Jan 2021, 21:28

NOTE 2008 1.6 PETROL DATASCAN VERSION

Post by michael94100 »

Hello everybody,

I have a French NOTE 2008 1.6 PETROL and i'd like to know which version of DATASCAN i should use?

thanks
Tom
Site Admin
Posts: 656
Joined: 09 Dec 2011, 19:17

Re: NOTE 2008 1.6 PETROL DATASCAN VERSION

Post by Tom »

Going by the year probably NDSII. What is the engine in your car? Check the supported vehicles page to see if it was tested with your car.
michael94100
Posts: 5
Joined: 22 Jan 2021, 21:28

Re: NOTE 2008 1.6 PETROL DATASCAN VERSION

Post by michael94100 »

the engine is a HR16DE.
In the supported vehicles page, i can see Nissan Note E11 - ECM but i don't know if it works for HR16DE.
And i thought also that Nissan changed in 2008.
Tom
Site Admin
Posts: 656
Joined: 09 Dec 2011, 19:17

Re: NOTE 2008 1.6 PETROL DATASCAN VERSION

Post by Tom »

We have not tested with this engine. The HR16DE was developed in conjunction with Renault so there is a good chance that is already using CAN bus for diagnostics.

I would recommend testing connection with the NDSIII software and then purchasing the license.
michael94100
Posts: 5
Joined: 22 Jan 2021, 21:28

Re: NOTE 2008 1.6 PETROL DATASCAN VERSION

Post by michael94100 »

For information,
i confirm that the HR16DE is not using CAN BUS.

It's work with NDSII with a KKL cable.
And only the ECM module works ;)

Thanks
Tom
Site Admin
Posts: 656
Joined: 09 Dec 2011, 19:17

Re: NOTE 2008 1.6 PETROL DATASCAN VERSION

Post by Tom »

Thanks for the update
Post Reply