Cannot connect to TCM, 350Z

Discussions related to Nissan DataScan II (NDSII) Windows PC software.
Post Reply
ninevoltz
Posts: 2
Joined: 17 May 2017, 08:11

Cannot connect to TCM, 350Z

Post by ninevoltz »

I have a 2003 USDM 350Z. I am using the blue USB cable I ordered from ConceptZ Performance that is supposed to be compatible with NDSII. I am able to connect to the ECU, the BCM, and ABS, but not the TCM. Any idea why that might be? I was able to program my new spare key into the BCM using the pin code generated by Nissan SuperCode. I had a hard time finding where to download SuperCode, would it be ok to upload it to this forum for other people to use?
Tom
Site Admin
Posts: 656
Joined: 09 Dec 2011, 19:17

Re: Cannot connect to TCM, 350Z

Post by Tom »

Is you car automatic or manual? It only works with automatic cars.

You can upload the SuperCode to one of the file sharing websites and post a link on this forum.
ninevoltz
Posts: 2
Joined: 17 May 2017, 08:11

Re: Cannot connect to TCM, 350Z

Post by ninevoltz »

Yes, my car is an automatic.
As for SuperCode, I'll just share the link to where I found it.
https://www.4shared.com/rar/xAjK2QDDce/ ... Tools.html
Tom
Site Admin
Posts: 656
Joined: 09 Dec 2011, 19:17

Re: Cannot connect to TCM, 350Z

Post by Tom »

Try the "Find ECU" function under Settings->Communication. See what ECU Ids you get.
If you are not getting ECU Id 18 try changing the "Ini Timer Offset" and scan again. Try positive and negative numbers.
Post Reply