Coming soon...

Discussions related to Nissan DataScan III (NDSIII) Windows PC software.
Post Reply
Site Admin
Posts: 613
Joined: 09 Dec 2011, 19:17

Coming soon...

Post by Tom » 02 Aug 2017, 20:43

The NDSIII Windows PC software is coming soon. One of the features we are working on is an AFR conversion that uses the stock WBO2 sensors.

Post comments about what features you would like to see and why.

Posts: 17
Joined: 28 Jun 2017, 20:09

Re: Coming soon...

Post by Balko » 03 Aug 2017, 17:38

Hi Tom,

Driving a Nissan 350z VQHR 2008 6 Speed

I would like to see all the temperatures of the liquids. Since I'm on the race track, that are vital Informations for me. Then I would like to have the data from the injection. At the V 6 left bank and right bank so I can see if both banks get the same amount of gasoline. It would be good to see the ignition angle to make sure I do not get into the knock. That would be some nice stuff.

Thanks and keep up the good Work

Posts: 17
Joined: 28 Jun 2017, 20:09

Re: Coming soon...

Post by Balko » 26 Aug 2017, 21:44

Hi Tom
Another thing that i would like.
Comparing two Log files in one Dataloging Program. So i can see the Difference between two files.

Standard Airfilter
Open Airfilter system

best Regards

Posts: 17
Joined: 28 Jun 2017, 20:09

Re: Coming soon...

Post by Balko » 23 Nov 2017, 03:05

Hi a short replay too NDSIII
I am using it quit often to log my Nissan 350z HR and it works great.

Some points which i would find Practical in NDS III would be:

-When i am compering Log Files i would like too do an Overlay of both Files.
because: When i am on the Track i would like to compare Ran 1 and 4 etc. Or changing the Air filter or other things

-an i would like to try the rest of NDS III :) PLEASE :)

best regards

Posts: 5
Joined: 24 Jan 2017, 13:26

Re: Coming soon...

Post by aleXx » 18 Jan 2018, 14:14

Hi Tom,
I would like to renew my congratulations for the job done with NDSIII android, I am using it every day since last year when i bought it... have to say been very helpful for monitoring my Teana J32 Vq25de (Thailand) and few times crucial on some repair and maintenance.
I can't wait for the Windows Pc version, do we have any date of release yet?? any soon we can hope?? thanks

Posts: 2
Joined: 10 Jun 2019, 07:30

Re: Coming soon...

Post by plazomat » 10 Jun 2019, 13:44

Great to hear this is being worked on - is there an anticipated release date?

If beta testers are required I would be willing to give it a go.


Posts: 3
Joined: 16 Jun 2020, 03:25
Location: Nigeria

Re: Coming soon...

Post by Jotuka1 » 18 Jun 2020, 21:39

Hello Tom,

Thanks for the thread. I will like to see the 'Idle relearn' and Throttle Pedal relearn feature for the NDSIII.
A DPF Reset will also be very useful for Diesel based ECMD.

Thanks for your innovations.



Post Reply