The TPMS functionality is something that quite a few people requested. We will look into implementing some TPMS functionality. What would be the most useful functions? Sensor registration?
Changing the Rev limiter would require ECU reflash. It's not something that can be easily adjusted.
Search found 629 matches
- 21 Jun 2022, 22:22
- Forum: Nissan DataScan III
- Topic: NDS3 with Y62 Patrol
- Replies: 10
- Views: 7400
- 21 Apr 2022, 16:38
- Forum: Nissan DataScan II
- Topic: 2002- Altima 3.5L - high idle speed
- Replies: 2
- Views: 4675
Re: 2002- Altima 3.5L - high idle speed
The NDSII software is counting while the ECU is returning "ECU busy" message. There is no other information provided by the ECU. After counting to 5000 it just gives up. It would be good if the ECU provided some more information about why it can not complete the IAVL but this unfortunately...
- 10 Apr 2022, 21:36
- Forum: Nissan DataScan II
- Topic: 2002- Altima 3.5L - high idle speed
- Replies: 2
- Views: 4675
Re: 2002- Altima 3.5L - high idle speed
So the mechanic was able to lower the idle RPM without performing the IAVL?
- 04 Apr 2022, 16:30
- Forum: Nissan DataScan II
- Topic: 2002- Altima 3.5L - high idle speed
- Replies: 2
- Views: 4675
Re: 2002- Altima 3.5L - high idle speed
So you have tried all the suggestions in the service manual and everything checks out? Did your Nissan mechanic friend have any suggestions? How high is your idle? What are your fuel trims: Short Fuel Trim, Long Fuel Trim, A/F Alpha, A/F Alpha stored? You should have some of them but probably not al...
- 04 Apr 2022, 16:06
- Forum: Nissan DataScan II
- Topic: 2002 Altima 3.5SE
- Replies: 6
- Views: 5992
Re: 2002 Altima 3.5SE
It depends on your PC. There is no one number that works for all. Try positive and negative values.
- 28 Mar 2022, 14:00
- Forum: Nissan DataScan II
- Topic: 2002 Altima 3.5SE
- Replies: 6
- Views: 5992
Re: 2002 Altima 3.5SE
If you need to press the Connect button twice it's probably a timing problem. Try adjusting the "Ini Timer Offset" value. You should be able to find a setting that let you connect every time. You will loose connection if you change tabs. So if you go from the ECM to a TCM tab this will dro...
- 25 Mar 2022, 11:45
- Forum: Nissan DataScan II
- Topic: 2002 Altima 3.5SE
- Replies: 6
- Views: 5992
Re: 2002 Altima 3.5SE
That looks much better
- 25 Mar 2022, 11:43
- Forum: Nissan DataScan III
- Topic: NDS3 with Y62 Patrol
- Replies: 10
- Views: 7400
Re: NDS3 with Y62 Patrol
When the software connect it checks which options are supported by the ECU. If the ECU reports that they are not supported the option is disabled in the software. Some options like adjustments have limits set in the ECU software. For example, the ignition timing adjustment can only be adjusted by a ...
- 22 Mar 2022, 10:08
- Forum: Nissan DataScan II
- Topic: 2002 Altima 3.5SE
- Replies: 6
- Views: 5992
Re: 2002 Altima 3.5SE
Have you tried connecting from the BCM tab with the ignition in OFF position, ON position, ON position and the engine running? Try all 3 conditions and let us know results for all 3. You need to prove that your cable and settings are correct by connecting to at least one ECU. The debug log file is s...
- 21 Mar 2022, 17:29
- Forum: Nissan DataScan II
- Topic: 2002 Altima 3.5SE
- Replies: 6
- Views: 5992
Re: 2002 Altima 3.5SE
ECU id 40 is the the BCM. It's not the engine ECU. You should be able to connect from the BCM tab, this would prove the cable is working ok but that will not help you fix issues with your engine. There must be some other issues preventing you from connecting to the ECM. The fact that you can find an...