Search found 629 matches

by Tom
18 Aug 2021, 22:55
Forum: Nissan DataScan III
Topic: Could not connect to ABS, but will connect with other programs (CAN ID?)
Replies: 5
Views: 3001

Re: Could not connect to ABS, but will connect with other programs (CAN ID?)

You can't use NDSII with NDSIII license. It's a different software. Those 2 modules use k-line for diagnostics rather than the CAN bus. It's a different type of connection and protocol. It's like they are using a dial-up modem connection and the rest of your modules use an ADSL or cable modem. You g...
by Tom
17 Aug 2021, 00:09
Forum: Nissan DataScan II
Topic: new user connection issue
Replies: 3
Views: 3257

Re: new user connection issue

Have you tried adjusting the "Ini Timer Offset" value under Settings->Communication? Try positive and negative values and try connecting every time you make a change. Also try the Find ECU function. See if you get any active ECU Ids. Most Nissans from 2006 still use the k-line for diagnost...
by Tom
16 Aug 2021, 23:48
Forum: Nissan DataScan III
Topic: Could not connect to ABS, but will connect with other programs (CAN ID?)
Replies: 5
Views: 3001

Re: Could not connect to ABS, but will connect with other programs (CAN ID?)

You would need to use the NDSII software to connect to the ABS and SRS ecus. It actually says "Supported by NDSII" not NDSIII.

Not sure what ECU Id 1F is. It's not something our software supports.
by Tom
06 Aug 2021, 21:20
Forum: Nissan DataScan III
Topic: Could not connect to ABS, but will connect with other programs (CAN ID?)
Replies: 5
Views: 3001

Re: Could not connect to ABS, but will connect with other programs (CAN ID?)

The NDSIII software is preconfigured with the default CAN IDs for each module. If you can not connect to the ABS module there is a good chance that module is still using k-line for diagnostics. Try the "Test for k-line ECUs" function under Settings->Communication. See if you get any active...
by Tom
24 Jul 2021, 00:55
Forum: Nissan DataScan II
Topic: Changing an ECU
Replies: 1
Views: 2444

Re: Changing an ECU

In most cases you need to initialise the ECU so it can talk to the BCM. This is can not be done with the NDSII software. In some cases you might be able to just plug it in and it will just work with the existing BCM. Once that is done, you will need to re-register the keys so they are recognized by ...
by Tom
24 Jul 2021, 00:45
Forum: Nissan DataScan III
Topic: IAVL failed
Replies: 3
Views: 2887

Re: IAVL failed

Look for any loose hoses that could be leaking air. Sometimes people forget to reconnect some after throttle cleaning. Clear self learn before starting the IAVL procedure. Try running the IAVL with ignition ON and engine OFF first. Then with the engine ON. Sometimes when the idle is too high the pro...
by Tom
24 Jul 2021, 00:35
Forum: Nissan DataScan III
Topic: Program crashes when icon clicked. 350z hr
Replies: 3
Views: 2554

Re: Program crashes when icon clicked. 350z hr

Yes. K+CAN means it works with the k-line and the CAN bus.
by Tom
07 Jul 2021, 14:59
Forum: Nissan DataScan II
Topic: Cannot connect Using vag kkk 409 (350z hr)
Replies: 1
Views: 2695

Re: Cannot connect Using vag kkk 409 (350z hr)

The 350Z HR engine ECU uses CAN bus for diagnostics so you need to use a Vag K+CAN adaptor and NDSIII.
by Tom
07 Jul 2021, 14:57
Forum: Nissan DataScan III
Topic: Program crashes when icon clicked. 350z hr
Replies: 3
Views: 2554

Re: Program crashes when icon clicked. 350z hr

The CAN filter fail error means you are not using a K+CAN adaptor.
by Tom
07 Jul 2021, 14:53
Forum: Nissan DataScan III
Topic: IAVL failed
Replies: 3
Views: 2887

Re: IAVL failed

Did you make sure there is no electrical load? Turn off air con fan, radio, lights etc. Is the steering wheel in straight ahead position? So the power steering pump (if there is one)is not creating any load on the engine. Did you check for any air leaks in the intake? Even a very small air hose will...