Search found 21 matches
- 17 Jul 2023, 12:06
- Forum: Nissan DataScan II
- Topic: Access all Control Module on latest Nissan Micra K11
- Replies: 1
- Views: 621
Re: Access all Control Module on latest Nissan Micra K11
You can get the Consult I adaptor with OBDII plug from ECUTalk https://www.ecutalk.com.au/interface.aspx Not sure which protocol the SRS on your car is using. You can usually tell by reviewing the wiring diagram but it has to be for your specific model car. If the SRS ecu has Rx and Tx pins then it ...
- 08 Mar 2022, 12:26
- Forum: Nissan DataScan II
- Topic: 2002 Altima 3.5SE
- Replies: 6
- Views: 5965
Re: 2002 Altima 3.5SE
The adaptor you are using is an ELM327 type adaptor. It will not work with the NDSII Windows PC software.
You need a VAG KKL or a VAG K+CAN adaptor.
You need a VAG KKL or a VAG K+CAN adaptor.
- 22 Dec 2021, 18:36
- Forum: Nissan DataScan I for Android
- Topic: init issue when connecting to android
- Replies: 2
- Views: 2683
Re: init issue when connecting to android
Have a look at this topic
https://nisscan.com/phpBB3/viewtopic.php?f=12&t=340&sid=70c96729ad1319b03ffbb40abba2295f
https://nisscan.com/phpBB3/viewtopic.php?f=12&t=340&sid=70c96729ad1319b03ffbb40abba2295f
- 15 Jul 2020, 00:44
- Forum: Nissan DataScan III
- Topic: VAG-K + CAN fails. Is there a Bluetooth alternative?
- Replies: 2
- Views: 3440
Re: VAG-K + CAN fails. Is there a Bluetooth alternative?
Most of the Vag K+CAN adaptors use the FTDI USB chip. Have you tried an FTDI driver?
https://www.ftdichip.com/Drivers/VCP.htm
Im not aware of any Bluetooth Vag K+CAN adaptors. The Jaycar adaptor would probably be an ELM327 model which is not compatible with the NDSIII Windows PC software.
https://www.ftdichip.com/Drivers/VCP.htm
Im not aware of any Bluetooth Vag K+CAN adaptors. The Jaycar adaptor would probably be an ELM327 model which is not compatible with the NDSIII Windows PC software.
- 08 May 2020, 10:09
- Forum: Nissan DataScan I for Android
- Topic: datascan for ga16dne
- Replies: 1
- Views: 2457
Re: datascan for ga16dne
The GA16DA engine ECU is not OBDII compliant so you will not be able to use the ELM327 adaptor with it. You need a Consult I adaptor with OBDII plug and an NDSI software or app. For the app we recommend a Bluetooth adaptor and for the Windows PC software an USB adaptor. Bluetooth adaptor and OBDII p...
- 04 Oct 2017, 15:46
- Forum: Nissan DataScan I for Android
- Topic: Ini fail/300zx
- Replies: 6
- Views: 5485
Re: Ini fail/300zx
Most probably the adapter you are using doesn't generate the clock signal. This older ECUs require the clock signal to initiate connection.
It could be that the adapter you are using was never design to generate the clock signal or you might have to do the white wire fix as posted before.
It could be that the adapter you are using was never design to generate the clock signal or you might have to do the white wire fix as posted before.
- 11 Jul 2017, 14:31
- Forum: Nissan DataScan III for Android
- Topic: Will This OBD II adapter work
- Replies: 5
- Views: 4250
Re: Will This OBD II adapter work
Balko wrote: > Hi, > I asked the producer if this is ELM 327 Chiped. This has not yet been > answered and therefore I can not exactly say if there is a Chip or not. Now > i contact (www.obdinnovations.com) what you recomendet. I wanted to know > what the shippingcost to Germany would be. Then I will...
- 03 Jul 2017, 15:58
- Forum: Nissan DataScan III for Android
- Topic: Will This OBD II adapter work
- Replies: 5
- Views: 4250
Re: Will This OBD II adapter work
I can't see from the description. Does it use an ELM327 chip?
- 03 Jul 2017, 15:46
- Forum: Hardware
- Topic: Nissan 300ZX 1992
- Replies: 4
- Views: 3768
Re: Nissan 300ZX 1992
Nice 300ZX!!!
You need one of these adapters http://www.buyobd.com/index.php?main_pa ... ducts_id=2
Or you can try to build one as per instructions on our website.
http://home.exetel.com.au/nds/NDSIA/ind ... edadaptors
You need one of these adapters http://www.buyobd.com/index.php?main_pa ... ducts_id=2
Or you can try to build one as per instructions on our website.
http://home.exetel.com.au/nds/NDSIA/ind ... edadaptors
- 06 Apr 2017, 21:27
- Forum: Nissan DataScan I
- Topic: Cannot connect to R32 GTR ECU
- Replies: 4
- Views: 4943
Re: Cannot connect to R32 GTR ECU
It sounds like it could be a faulty adapter.
Your car uses the older style ECU that requires Clock signal from the adapter. Some adapters do not generate the clock signal correctly. They work on the newer Nissans but not on the R32 or Z32.
Your car uses the older style ECU that requires Clock signal from the adapter. Some adapters do not generate the clock signal correctly. They work on the newer Nissans but not on the R32 or Z32.