nisscan.com

My skyline is from 1993 with a Z32 ECU with Nistune. Z32 ECU partnumber: 23710-41P03

You need to do the wire fix then it will work. I had the same problem. The most of the adapters have a production fault, therefore the adapter will not work. The wire fix will solve the problem. See link below. http://home.exetel.com.au/nds/phpBB3/download/file.php?id=163&sid=4c665bb3cd360f9d2da...

Problem is solved. Both the adapter and NDSI app are working. I got a faulty adapter and had to do the white wire fix. The problem was that there was no CLK signal on Pin 9 communicating with the ECU. With the wire fix there is communication with the ECU now. I want to thank tom for his technical su...

OK thanks, I have the "Nissan Consult Bluetooth adaptor with optional OBDII interface. Available from www.obdinnovations.com." as mentioned on the NDS site. I've checked the pins on the adapter and cable connector who connects with the circuitboard inside the adapter. As mentioned in my ea...

Can you tell me which of the following signals are needed to let the adapter/nissan datascan work.

CLK
RX
TX
CHK
IGN
Ground (-)

Ok Tom, i will try that. I will also measure the MHZ signal on pin 2 from the adapter, because i thought that the signal came from the ecu. I followed the cables from the obd connector in my car to the ecu and there is nothing connected inbetween. Hicas is not in the car anymore and is controled by ...

I have measured Hz with my multimeter on pin 2 on my car connector. Measurment is 0 hahaha. But now i see . The clock signal is coming from the adapter not from the ecu. I will try this when i'm at my car in the weekend.

Tom wrote: > It sounds like you are doing everything right. You should probably start > with the basics. > - Is the engine running when you try to connect? Yes, the car is running when i try to connect. > - Is the consult port wired to your Nistune ECU? Yes, the consult port is wired to the ECU > - ...

Because i got a little bit frustated of searching i stopped searching. HAHAHA. Now i have trouble connecting the BT adapter also, i thought to start searching again with the usb adapter. I have checked the cables from the ECU to the OBD connector in my car. See Attached picture. These look ok. [atta...

I have done some research and found out the following. [attachment=0]Connections checked.jpg[/attachment] I have checked the cables from the ECU to the OBD connector in my car. See Attached picture. These look ok. [attachment=1]OBD1 connector car.jpg[/attachment] Pin 1 = (-) black/silver ECU channel...