nisscan.com

Hello Tom I have 2009 Nissan Altima, which uses Consult III for everything except ABS and SRS, for which it uses Consult II. So, I bought NDS II just for that. See this post: https://nisscan.com/phpBB3/viewtopic.php?t=913&sid=8712ef0c2926739a35db9d62e04106ae Now, my problem is the active test ...

Thank you. Can I use NDS II with my NDS III licenses?

For curiosity's sake, do you why these two modules need NDS II?

Tom wrote: > The NDSIII software is preconfigured with the default CAN IDs for each module. If you > can not connect to the ABS module there is a good chance that module is still using > k-line for diagnostics. > > Try the "Test for k-line ECUs" function under Settings->Communication. > See if you ...

[2009 Altima 2.5) Hello Nissan DataScan can't connect with the ABS module, while other apps on cheap bluetooth devices can connect just fine. I found that the CAN ID for each module can be changed in the communication settings, but how do I find out what is the CAN ID for the ABS or any module? Is ...

Tom wrote: > Did you make sure there is no electrical load? Turn off air con fan, radio, > lights etc. > Is the steering wheel in straight ahead position? So the power steering > pump (if there is one)is not creating any load on the engine. > Did you check for any air leaks in the intake? Even a ...

I'm working on a friend's 2010 Altima 2.5. He cleaned the throttle body and was complaining of high idle. I use DataScan III on a windows 10 tablet, it connects quickly to the ECM/TCM/BCM/IPDM no problem. My issue is that I cannot compete the idle air learning procedure. The first time it failed I ...