ECU Part Number ABS

The ABS tab shows the Anti-lock Braking System ecu Nissan Identification part number. Basic Functions can be selected by clicking on the buttons or using the Menu bar. Most functions except Data Replay and Log Analyser are disabled until communication with the ECU is successfully established.

Progress bar at the bottom indicates data being send between the ECU and PC. If the bar is not moving there is no data being received from the ECU.


Data Logging ABS

Selected parameters can be logged to a file. This function can also be accessed from the Data Display window so the data can be logged while it is displayed. The data log file can be analysed using the Data Replay or Data Analyser functions.

Data Display ABS

Classic design gauges

Modern design gauges

Data Display window uses 6 gauges and 9 registers to display a real time information about the ABS. Parameters are assigned to gauges in the Data Display Settings window.

Self Diagnostics ABS

Self Diagnostics function allows users to read and reset ABS fault codes.

Log Analyser

Classic design

Modern design

Log Analyser is used to review log files previously generated by with Data Logging function. Graphs are drawn by selecting boxes next to parameter value. Graph colours match the parameter value colours.

Data Replay

Classic design gauges

Modern design gauges

Data Replay allows users to replay previously saved data logs. Replay can be speeded up or slowed down using the Replay speed scroll bar. The Position scroll bar moves the currently diplayed record up and down the log file.

Work Support ABS

Work Support functions allow users to perform advance service procedures. Those procedures may need to be performed after replacing parts.

Steering Angle Sensor Reset - After removing/installing or replacing VDC/TCS/ABS control unit, steering angle sensor, steering components, suspension components, and tires, or after adjusting wheel alignment, make sure to adjust neutral position of steering angle sensor before running vehicle.