Clear Self Learn and Idle Air Volume Learn

Discussions related to Nissan DataScan II software (NDSII) for Android
Post Reply
G35CO
Posts: 1
Joined: 08 May 2015, 05:25

Clear Self Learn and Idle Air Volume Learn

Post by G35CO »

Hello, I’m getting ready to clean the TB in my 03 G35 sedan and would like to use the Clear Self Learn and Idle Air Volume Learn in the Work Support.

Do i need to have the car running in order to perform these works?
Should i clear the self-learn first and then do the idle learn?
Is there a specific steps i need to follow or conditions i need to insure before i run these steps?

After i clean the TB i need to preform several steps and i was wondering if we can add them to the support group. I need to complete the following steps:
1. PERFORM ACCELERATOR PEDAL RELEASED POSITION LEARNING
2. PERFORM THROTTLE VALVE CLOSED POSITION LEARNING

Great app!!!
Tom
Site Admin
Posts: 656
Joined: 09 Dec 2011, 19:17

Re: Clear Self Learn and Idle Air Volume Learn

Post by Tom »

The engine should be running.
Yes, clear self-learn first.
Yes, there are a few conditions you need to meet to successfully complete IAVL. Check the service manual.

The position learning functions are automatically performed by the ECU and can not be initiated by a software.
Post Reply